036232A: Rear trailing arm bush kit eccentric SPORT
036232A: Rear trailing arm bush kit eccentric SPORT
In Stock. Ready to Ship.
Couldn't load pickup availability
E36 Compact · E30 · E21 · Z3036232A
3
mm offset
90
ShA hardness
4
bushes
Geometry correction for lowered cars · grease included
01Overview
Four eccentric rear trailing arm bushes — the ones you fit when the car is on the floor and the rear geometry has run out of adjustment.
The bore sits 3 mm off the axis of the bush. Turn it, and you pull the arm back into range: that is toe and camber recovered on a car that has been dropped past what BMW planned for.
90 ShA polyurethane — the yellow SPORT compound. StrongFlex build this grade for tuned and lowered cars: the suspension gets noticeably stiffer, the geometry stops moving under load and the car holds its line when you push it. This is the hardness that goes into a drift or track E36.
Every StrongFlex product ships with the correct grease for fitting.
The bore sits 3 mm off the axis of the bush. Turn it, and you pull the arm back into range: that is toe and camber recovered on a car that has been dropped past what BMW planned for.
90 ShA polyurethane — the yellow SPORT compound. StrongFlex build this grade for tuned and lowered cars: the suspension gets noticeably stiffer, the geometry stops moving under load and the car holds its line when you push it. This is the hardness that goes into a drift or track E36.
Every StrongFlex product ships with the correct grease for fitting.
02In The Box
- 4x 031860A Rear trailing arm bush – eccentric SPORT
03Specification
Reference036232A
MaterialPolyurethane (PUR/PU)
Hardness90 ShA
yellow SPORT compound
yellow SPORT compound
ColourYellow
black on request
black on request
Offset3 mm from bush axis
Bush diameter27 mm
Pcs per kit4
Quantity per car1 kit
GreaseIncluded
04Fitment
Fits the 27 mm rear arm bush across a long run of rear-drive BMWs — including the E36 Compact (93–00) and the Z3 E36/7 (94–02).
E28, E24 and E23: these cars came with two rear arm bush diameters — 27 mm (this kit) and 44 mm (036235). Cars built up to 09/82 use 27 mm, after 09/82 44 mm. Measure yours before ordering; the date is a guide, not a guarantee.
E28, E24 and E23: these cars came with two rear arm bush diameters — 27 mm (this kit) and 44 mm (036235). Cars built up to 09/82 use 27 mm, after 09/82 44 mm. Measure yours before ordering; the date is a guide, not a guarantee.
05Options & Notes
Why eccentric
A standard centric bush puts the arm exactly where the factory put it. That is right for a standard car. Lower the car and the arm angle changes — toe goes out, camber goes with it, and the tyre wears on one edge.Rotating an eccentric bush moves the pivot up to 3 mm in any direction, which is enough to bring a lowered rear axle back into a usable alignment window. Set it on the alignment rack, not by eye.
